|
|
 |
QLA2310FL |
 |
|
64-bit 66MHz PCI-X to 2Gb Low-Profile Fibre Channel Adapter, multi-mode optic. | |
|
|
|
|
|
|
| |
| Why QLogic? |
|
Designed and deployed by major server and storage OEMs, the QLogic SANblade QLA2310FL host bus adapters (HBAs) offer the high performance of 2-Gbps Fibre Channel combined with 64-bit, 66-MHz PCI-X. These multimode optic HBAs are targeted for servers in direct attach storage (DAS) as well as storage area network (SAN) environments.
|
| Cost Effective |
If you are looking for low-profile boards for 1U and 2U servers, the QLA2310FL is a low-profile MD2 compliant version of the QLogic QLA2310F, is the perfect fit.
|
| Leading Single Chip Integration |
The QLA2310FL uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.
|
| Broad OEM Acceptancen |
The QLA2310FL HBA is validated by every major OEM including Dell, EMC, HDS, HP, IBM, and Sun. The QLA2310’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.
|
| Simplified Setup |
|
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QLA2310FL is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.
|
| Proven Architecture |
|
The QLA2310FL architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QLA2310FL also has proven interoperability with all major software applications, hardware platforms, and operating systems.
|
| The Bottom Line |
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
|
| | | |
|
|
|
|
|
| |
| Ease of Use |
- Auto negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
- Easy detection of activities through an LED panel:
- Power
- Online
- Signal acquired
- Loss of synchronization
- Firmware error
- Automatic topology detection
- Quick start guide
- Persistent binding
|
| Superior Scalability |
- Concurrent support for SCSI and IP protocols
- Load balancing for optimized performance
- Simultaneous initiator and target mode support
- Local and remote management
|
| Enhanced Reliability |
- Unique, single-integrated Fibre Channel controller for added reliability and optimum performance
| | |
|
|
|
|
|
| |
|
Host Bus Interface Specifications |
| Speed |
|
64-bit, 66-MHz PCI-X |
| Single voltage |
|
3.3 V and 5.0 V buses supported |
| Compliance |
|
PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification 1.0, PCI Bus Power Management Interface Specification rev. 1.1 |
| Fibre Channel Specifications |
| Speed |
|
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex |
| Topology |
|
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port) |
| Buffer credits |
|
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued |
| Class of service |
|
Class 3 Fibre Channel service |
| Protocols |
|
SCSI-FCP, IP, FC-TAPE |
| Compliance |
|
Compliance: Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS) |
| Physical Specifications |
| Ports |
|
One |
| Media |
|
Multimode Optic |
| Optics |
|
Short wave laser |
| Connections |
|
LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module |
| Form factor |
|
Low-profile MD2: 16.93 cm×5.15 cm (6.7"×2.5") |
| Bracket size |
| Low-profile size |
| Environment and Equipment Specifications |
| Airflow |
|
0 lf/m |
| Temperature |
|
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 70°C/158°F |
| Humidity |
|
Relative (non-condensing): 10% to 90%
Storage: 5% to 95% |
| Power dissipation |
|
~ 4.75 watts |
| Cable |
| 50/125μm multimode fiber, 62.5/125 μm multimode fiber |
| Cable distances |
|
1 Gbps: 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber
2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber |
| Agency Approvals—Product Safety |
| US/Canada |
|
UL, cUL, UL1950, cUL C22.2 No.950, Class 1 Laser Product per DHHS 21CFR J |
| Europe |
|
73/23/ECC Low Voltage Directive:
TUV: EN60950: 1992+A1,2,3,4,11, EN60825-1: 1994+A11, EN60825-2: 1994 |
| Agency Approvals—EMI and EMC |
| US |
|
FCC Part 15, Class B |
| Canada |
|
Industry Canada ICES-003, Class B |
| Europe |
|
89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class B, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1994 |
| Japan |
|
VCCI, Class B |
| Taiwan |
|
CNS 13438 Class B BSMI |
| New Zealand/Australia |
|
AS/NZS 3548 Class B |
| Korea |
|
MIC |
| Tools and Utilities |
| Management tools |
|
FC HBA Manager |
| Device utilities |
|
Command line interface; configuration utilities resident with BIOS and FCode |
| Boot support |
|
Intel x86: BIOS (32-bit), EFI (64-bit); Solaris SPARC: FCode |
| APIs |
|
SNIA HBA API V2, SMI-S, and FDMI |
| Operating systems* |
|
Windows Server 2003 (32-bit and 64-bit), Windows NT, Windows 2000, Windows XP, Solaris SPARC, Linux (32-bit and 64-bit), Novell NetWare, Mac OS X |
| |
| * Subject to availability of OS and hardware from respective OEMs. | | |
|
|
|
| |
QLogic Branded Product |
| |
|
Generic product configured for all environments |
| SKU |
Contents |
Warranty |
Where to Buy? |
| QLA2310FL‑CK |
Ships in an individually packed box with a standard size bracket and a spare low-profile bracket, SANsurfer for SANblade FC 3 years HBAs CD, and Quick Start Guide. |
3 years* |
Click here for a list of authorized resellers and distributors. | |
|
|
| |
* Standard warranty duration is 36 months and includes continuous access to support resources on qlogic.com, business day remote technical support via telephone and email and advanced exchange for confirmed HBA failures. A 2-year warranty extension promotional offer is extended for purchases of specified new Fibre Channel HBAs from authorized VAR / Reseller partners after Feb. 14, 2005. | |
|
|
|
|
|
|
|
|
|
|
Brochures & White Papers |
|
|
|